High-flow soft water for larger and busier homes
The Kinetico SuperSoft Pro combines non-electric operation, twin-tank performance and a listed flow range of up to 45 litres per minute. A separate 25 kg brine tank gives it the capacity needed for demanding whole-home installations.
Twin-tank softenerContinuous household performance
Up to 45 L/minDesigned for higher flow demand
Efficient regeneration26.5 litres in around 11 minutes
25 kg salt capacitySeparate tablet-salt brine tank
Built for households with stronger water demand
The SuperSoft Pro is intended to soften the water supplied throughout the home, helping reduce limescale around boilers, showers, appliances, pipework and bathroom fittings. Its higher listed flow makes it a stronger option where several outlets may be used at once.
Non-electric operation
Water-powered control means there is no electrical connection or electronic timer to programme.
Twin-tank performance
The twin-tank arrangement is designed to maintain softened-water service during regeneration.
High-flow capability
A listed operating flow range of 1.1 to 45 litres per minute supports greater simultaneous demand.
Generous salt storage
The separate brine tank accepts up to 25 kg of tablet salt, reducing how often it needs topping up.
Capacity without excessive regeneration downtime
Each regeneration uses a listed 26.5 litres of water and takes approximately 11 minutes. Regeneration is driven by water use, helping the system respond to actual household demand.
Plan access for isolation, servicing and salt filling
The installation instructions require a suitable bypass arrangement and non-return valve. The softener and separate brine tank must remain accessible after installation for servicing, commissioning and salt replenishment.
- Install in accordance with current UK water regulations
- Use a suitable bypass kit and non-return valve
- Keep the softener and brine tank accessible
- Arrange installation through a suitably qualified installer
Check pressure, drainage and connections before ordering
A complete installation requires an inlet, softened-water outlet, suitable drain and overflow routes, plus a bypass arrangement. Where incoming pressure is too high, the installation may also require a pressure-reducing valve.
- Operating pressure range: 1.8 to 6 bar
- Inlet and outlet: 1-inch male BSP
- Operating water temperature: 2°C to 50°C
- Confirm safe drain and overflow termination points
Allow space for both the softener and brine tank
The SuperSoft Pro uses a separate brine tank rather than a single combined cabinet. Measure the installation area carefully and include working clearance for pipework, valves, drainage and future maintenance.
Softener body
203 × 432 × 584 mm
Brine tank
300 × 410 × 510 mm
Dry product weight
41 kg as listed
Salt type
Water-softener tablet salt
Kinetico SuperSoft Pro specification
Read the manual before arranging installation
The manufacturer document covers plumbing, commissioning, bypass operation, salt use and routine maintenance.
Kinetico SuperSoft Pro user manualInstallation, commissioning, bypass and maintenance guidance
View PDF
Explore the wider Kinetico range
The SuperSoft Pro is the higher-flow option in the current household range. Compare it with the compact Supersoft HE, Supersoft HF and Sumo models if your flow, plumbing or installation-space requirements differ.
Kinetico SuperSoft Pro FAQs
Does the Kinetico SuperSoft Pro require electricity?
No. It is a water-powered, non-electric softener, so it does not need a mains electrical connection or electronic timer.
Can it provide soft water during regeneration?
The SuperSoft Pro uses a twin-tank design intended to maintain a softened-water supply while one tank regenerates.
What water pressure is required?
The listed operating range is 1.8 to 6 bar. Where the incoming pressure exceeds the permitted maximum, the installation must include a suitable pressure-reducing valve.
How much salt does the brine tank hold?
The separate brine tank has a listed storage capacity of 25 kg and is designed for water-softener tablet salt.
Can I use rock, solar or granular salt?
No. Use salt manufactured specifically for water softeners. The manual warns that unsuitable salt may interfere with performance and could affect warranty cover.
How often should I add salt?
Check the brine tank regularly and top it up before it runs out. Salt use varies with water hardness and household consumption, so there is no single refill interval for every home.
Does the SuperSoft Pro require servicing?
Yes. The manual recommends annual inspection and servicing to help maintain correct operation and performance.
Does it need a qualified installer?
Yes. Qualified installation is recommended so that the bypass, valves, pressure, drainage and connections comply with the manufacturer instructions and current water regulations.
Need help confirming the SuperSoft Pro?
Tell Regal Flow about your water hardness, boiler, bathrooms, flow demand and proposed installation space. We will help you check whether this is the correct Kinetico model before you order.