Filtered drinking water in a beautifully considered Matt Black finish
The Clearwater Stella brings normal hot, normal cold and separately filtered drinking water together in one elegant swan-neck tap. Three intuitive levers and independent internal waterways keep every supply simple to control.
Three independent leversHot, cold and filtered water
Swivelling C-spoutFlexible positioning over the sink
Medium-pressure suitableMinimum operating pressure in bar
Complete filter packageF6C1-UF and FlowPro included
One lever for each water supply
The two side levers operate domestic hot and cold water. A smaller central lever controls only the filtered cold-water supply, giving the Stella a clean single-tap appearance without compromising function.
- Domestic hot and cold water through the main mixer route
- Dedicated central lever for filtered drinking water
- Sealed filtered-water channel keeps supplies separate inside the tap
- Single-hole design replaces a mixer and separate filter dispenser
Every lever has a clearly defined role
The triple-lever arrangement makes each function immediately recognisable. Filtered drinking water travels through its own sealed route and remains separate from the ordinary hot-and-cold mixer water.
Hot water
Controlled by one of the two side levers.
Cold water
Controlled by the opposite side lever.
Filtered water
Dispensed using the central lever only.
F6C1-UF filtration and FlowPro monitoring are included
The current manufacturer package includes the Clearwater F6C1-UF ultrafiltration cartridge, filter components, connectors and Pure FlowPro digital monitor.
Ultrafiltration
Reduces chlorine, heavy metals, limescale and fine particles while retaining naturally occurring dissolved minerals.
Digital monitoring
FlowPro tracks both time and water usage to help indicate when cartridge replacement is due.
Practical filter life
Typical capacity is approximately 4,000 litres, with replacement recommended at around six months.
Confirm pressure, tap clearance and under-sink space
The Stella requires a minimum pressure of 0.5 bar. Allow for its 399 mm overall height, 207 mm projection and the filter, FlowPro monitor and connections beneath the sink.
Water pressure
Operating range is 0.5 to 5 bar.
Mounting hole
A single 35 mm tap hole is specified.
Tap clearance
Overall height is 399 mm with a 207 mm reach.
Filter clearance
Leave at least 30 mm below the cartridge for replacement.
Clearwater Stella Matt Black specification
Use the exact F6C1-UF replacement cartridge
The current Stella ST2MB package is supplied with the F6C1-UF. Check the code printed on an existing cartridge before reordering, particularly if your tap was originally supplied with an earlier-generation filter.
Clearwater Stella ST2MB installation guide
Review the official fitting sequence, pressure requirements, filter connections and maintenance guidance before installation.
Compare taps, Clearwater designs and replacement filters
Explore the wider collections before making your final choice, or find the correct cartridge when future maintenance is due.
Frequently asked questions
Does the Clearwater Stella Matt Black include a filter?
Yes. The current manufacturer package includes the F6C1-UF ultrafiltration cartridge, filter components and connectors, plus the Pure FlowPro digital usage monitor.
Which lever dispenses filtered water?
The smaller central lever controls filtered cold water. The two side levers operate ordinary domestic hot and cold water.
Does filtered water mix with ordinary tap water?
No. The Stella uses a dedicated filtered-water channel so treated drinking water remains separate from ordinary hot and cold mixer water inside the tap.
Is this Stella a pull-out tap?
No. The ST2MB is the non-pull-out Stella with a C-shaped swivelling spout. It should not be confused with Clearwater’s separate Stella-with-rinse model.
What pressure does the Stella require?
The manufacturer specifies an operating range of 0.5 to 5 bar. If static pressure exceeds 5 bar, a pressure-reducing valve is required.
How often should the filter be replaced?
Typical replacement is around 4,000 litres or six months. The manufacturer states that it must be changed within 12 months, even where usage is low. Follow the FlowPro indication and replace sooner if water quality or performance changes.
How should I clean the Matt Black finish?
Use a soft damp cloth and, if required, a mild detergent. Avoid abrasive pads, scouring products, acids and harsh chemicals because these can damage the decorative finish.
Need help checking compatibility?
Ask Regal Flow about water pressure, filter replacement, sink clearance or installation planning before you order.
