Acquapuro Verona · WRAS-approved 3-way filter tap
Hot, cold and filtered drinking water from one elegant chrome tap
Replace a standard kitchen mixer and separate drinking-water tap with one streamlined fitting. The Verona uses two simple levers and a dual-flow swivel spout to keep filtered water separate from the normal hot and cold supply.
Three water supplies, two levers
A cleaner sink area without a separate filtered-water tap
The right-hand lever controls the normal hot and cold mixed supply. The left-hand lever operates filtered cold drinking water from a compatible under-sink filtration system. Both supplies are delivered through the same swan-neck spout while remaining separated internally.
- Right lever for mixed hot and cold mains water
- Left lever dedicated to filtered cold drinking water
- Dual-flow spout keeps filtered and unfiltered water separate
- Swivel spout for practical sink access
- Polished chrome finish for contemporary kitchens
Filter system required: This listing is for the tap. Connect it to a compatible under-sink drinking-water filter or reverse osmosis system unless a filtration package is specifically included.
Three-way function Hot, cold and filtered water
Recommended from 0.5 bar For medium and high-pressure systems
35 mm mounting hole Standard single-hole installation
Five-year parts warranty One year on the chrome finish
Simple two-lever control
Each lever has one clearly defined purpose
The Verona avoids adding a third handle by combining the standard hot and cold mixer controls into the right-hand lever. Filtered drinking water remains independently controlled from the left.
Right-hand lever
Controls the temperature and flow of the normal hot and cold mixed water.
Left-hand lever
Dispenses cold drinking water from the connected filtration system.
Swivel spout
Moves across the sink area for rinsing, filling and food preparation.
Dual-flow outlet
Separate internal waterways prevent filtered water mixing with the mains supply.
Check the fit before ordering
Useful clearance with a compact single-hole base
The 383 mm overall height and 240 mm outlet clearance provide room for filling everyday bottles, saucepans and jugs. A 35 mm mounting hole is required, with a maximum stated worktop or sink thickness of 50 mm.
Measure first: Check the available space above the sink, the rear clearance needed for the levers and the space below the worktop for the hoses and filtration connections.
Designed for everyday kitchen use
Reliable ceramic controls and secure installation fittings
Quarter-turn ceramic valves provide smooth lever operation, while the solid-fix installation kit helps keep the tap stable on the sink or worktop. Supplied 450 mm flexible hoses include non-return valves.
Technical information
Acquapuro Verona 2 Lever specification
Continue browsing
Compare filter taps and alternative kitchen-tap designs
Helpful answers
Frequently asked questions
Does the Verona filter the water itself?
No. The tap delivers water from a compatible under-sink filtration or reverse osmosis system. The filter system must be purchased separately unless it is explicitly included as part of a package.
How do two levers provide three water options?
The right-hand lever mixes the normal hot and cold mains supplies. The left-hand lever independently controls the filtered cold-water supply.
Do filtered and unfiltered water mix inside the spout?
No. The dual-flow design uses separate internal waterways so filtered drinking water remains separate from the normal mixed supply.
Is the Verona suitable for a 0.5 bar water system?
The published recommended minimum is 0.5 bar, and the tap is described as suitable for medium and high-pressure systems. Performance at the minimum pressure will be lower than on a higher-pressure supply.
Is it suitable for a gravity-fed system?
Only where the measured dynamic pressure at the kitchen tap meets the recommended minimum of 0.5 bar. Do not rely solely on the system type; ask a plumber to verify the actual pressure before ordering.
What size hole is required?
The published mounting-hole requirement is 35 mm in diameter. The stated maximum sink or worktop thickness is 50 mm.
Can the tap connect to a reverse osmosis system?
It can be used with a compatible under-sink RO system, but the tubing and connector sizes must match. An appropriate adaptor may be required, so confirm compatibility before installation.
What warranty is supplied?
The published warranty is five years on parts and one year on the chrome finish, subject to the manufacturer's terms, correct installation and use.
Premium product support
Need to check pressure, measurements or filter compatibility?
Send us your existing filter-system model, connection size and a photo of the pipework beneath your sink. We will help you confirm whether the Verona and the required fittings are suitable before ordering.